Online Class: Beginning Chip Carving

When:
June 11, 2020 @ 2:00 pm – 2:45 pm America/Chicago Timezone
2020-06-11T14:00:00-05:00
2020-06-11T14:45:00-05:00
Where:
Ely Folk School
209 E Sheridan St
Ely
MN 55731

Thurs 6/11, 2:00 – 2:45 – IntroductionThis session will give you an overview to see if you’d like to take the class with time to order needed materials.Please note the different times: Thursday, 6/18/20 2:00 – 3:00Tuesday, 6/23/20 2:00 – 3:00Thursday, 6/25/20 2:00 – 4:00

Tuition: Freewill donation. Please contribute what you are able.

Materials: See below for materials you will need

Chip carving is a very old craft in many cultures, but the patterns we typically see are Northern European. This is an art form that almost anyone can practice with patience and a steady hand.

Chip carving generally consists of a set of triangular cuts layed-out in regular, geometric patterns, but can be more free form, as in lettering and pictures. You will need a sharp knife, the key to safety and ease of carving. You will learn how to handle and care for the knife, how to lay out a pattern for cutting, how to make the various cuts, and how to deal with mistakes.

The class is offered free, but you’ll still need to register so you can receive the Zoom invitation.

If you have questions about using Zoom, email or call 218-235-0138.The class is offered free, but you’ll still need to register so you can receive the Zoom invitation.

If you have questions about using Zoom, email or call 218-235-0138.

The class is offered free, but you’ll still need to register so you can receive the Zoom invitation.

If you have questions about using Zoom, email or call 218-235-0138.

Essential Supplies: Drafting Compass – higher quality examples: JARLINK – $6, Mr. pen – $12 Staetdler – $27 Pencil Ruler Various templates for arcs and triangles Chip Carving Knife – examples Pfeil Chip Carving Knife B – $20 Wayne Barton Chip Carving Knife – $50.

A more expensive knife will be ready to use. The less expensive Pfeil knife requires some work to tune it appropriately.

Knife Sharpening supplies: Extra Fine whetstone examples Arkansas white extra fine Black ultra fine stone for about $20. Generally any sharpening “stone” of 3000 grit or finer for final sharpening. Final stropping and polish – firm suede leather and stropping compound (metal rouge polish) such as Beaver Craft Leather Strop and honing compound for $10, or similar. Two Basswood pieces measuring 5″x5″x1/4″ or similar Bart can supply at $2 per piece, plus shipping, if necessary.

Optional Extras: Books by Wayne Barton, or other pattern guides for chip carving.The Complete Guide to Chip Carving by Wayne Barton – $20 General sharpening – DMT credit card-size diamond whetstones. Set of three, Course/fine/extra fine grit (325/600/1200) $25.00 (Amazon, D3EFC)

Woods used would be basswood (preferred), white pine or butternut. Typically the thickness would be ¼ to ½ inch. Most wood will come in¾ inch thickness or in blocks for 3-D carving. These would need to be resawn and planed to the dimensions desired. Some sources: Woodcraft and Rockler.

About the instructor: Bart Dunning has built furniture and done three dimensional and relief carving. He has been doing chip carving for 20 years.

Bart taught physiology for a number of years at several medical schools. He currently teaches skiing at Buck Hill in Burnsville and demonstrates chip carving at the Dakota City Heritage Village at the Dakota County fairgrounds and the Minnesota Landscape Arboretum in Chaska.

Register Here

Comments are closed.

Site by Web Goddess LLC

UA-127267183-1